Manufacturer Description:

The SmartPets Remote Vibration Training Collar SP 309 remote controller and receiver apply automatic matching technology, and the receiver will make sound when the batteries are installed in the receiver, then press any key of the remote controller and the receiver will make continuous sound, which shows it has successfully received the signal from the remote controller, and the remote controller may work normally. If the receiver doesn't make sound when installing batteries, please remove the batteries, and then install again 10 seconds later. Before using the product 1. Confirm that batteries have been installed in the remote controller and the receiver. 2. Checking the remote controller: Press the buttons on the remote controller respectively. The indicator light will be on. If the indicator light doesn't work or gives dim light, change the batteries. 3. Checking the receiver: The vibration induction switch being installed, when the receiver is shaken, the power will be connected automatically and the receiver will be on standby. While the receiver keeps still for over 5 minutes, the power will be cut automatically for saving energy. 4. Connect the collar with the receiver. Adjust the length of the collar so as it fits the neck of the pet. The proper tightness should be that you can put a finger in. 5. Respectively press the high frequency/low frequency vibration buttons on the remote controller. The receiver will make high frequency/low frequency vibration. 6. Press the Sound button on the remote controller and the receiver will make the sound of B-B. You can train the pet to take your orders by different tempos. Every order must have a fixed tempo. An insisting training will bring you a wonderful effect. For example, "three B-B" sounds mean "coming back". 7. Press the Light button on the remote controller and the receiver will give flashes of light, facilitating looking for your dog at night. Read more